2018 Latest Frequency and Symbol Rate, Multi TV Ghana

abyvhilke2ab.jpg
In fact, Multi TV has become a giant in the digital satellite TV industry not only in Ghana but the entire African continent. Just recently, we saw some announcement of their platform that they are going to upgrade their system. Well, that is true…they actually did the upgrade and for that reason, they have changed one or two things on their system most especially their frequency, polarization, and symbol rate.

If you use a multi-TV decoder and you are not able to receive their channels after the upgrade, all that you need to do is to recan your system by doing either a manual scan or blind scan. Below is a complete step by step do it yourself guide on how to rescan your multi tv decoder.


*SYNDICATED BOX DECODER

1.Press MENU.
2. On INSTALLATION press OK.
3. Select MANUAL SEARCH and press OK.
4. Press the green button on the remote to 5. edit the frequency.
6. Select MODIFY.
7. Press OK.
8. Type 12525
9. Press OK.
10. Select POLARIZATION: V
Press the RIGHT button on the OK to change to vertical.
11. Press OK.
12. Then select SYMBOL RATE 30000
13. Press the BLUE BUTTON to save and exit OK to start scanning.
14. Move channel down knob to start the search.
15. Press OK to start scanning.
Press exit.


*STRONGBOX DECODER

1. Press MENU.
2. Press the RIGHT vol button.
3. Input 0000 as the password.
4. Select MANUAL SCAN and press OK.
5. Press RED BUTTON on the remote to select transponder ASTRA 3A/3B.
6. Press green button to add TP list.
7. Input frequency 12525
8. Go to symbol rate and type 30000
9. Change the polarization to either V or H to make the bars change to green color.
Press OK to scan.
10. Exit and enjoy.
11. Press EXIT, to exit from the menu and start watching.


*SOMOTEX ASH BOX DECODER

1. Press MENU.
2. Select INSTALLATION.
3. Press the red button to EDIT.
4. Input 11595 on the FREQUENCY.
Press OK.
5. Input 30000 on the SYMBOL RATE.
6. Select POLARITY and press RIGHT button to select either Vertical or Horizontal.
7. Select SAVE and press OK.
8. Press on the BLUE button and OK to scan.
9. Press OK on YES.
10. Press EXIT to watch channels.


QUALITY BOX DECODER

1. Press MENU.
2. Scroll down to DVB-S, Click OK.
3. Input 0000 and press OK.
4. Select DISH SETTINGS.
5. Click the YELLOW BUTTON on the remote to edit TP.
6. Scroll down to SYMBOL RATE and key in 30000
7. Scroll to YES and click OK.
8. Scroll to SERVICE SEARCH, click OK.
9. Scroll to START SCAN and click OK.


*STRONGBOX (SRT 4330) DECODER

1. Tune to a MULTI TV channel.
2. Press MENU on the remote.
3. Press OK and input 0000.
4. Go to TRANSPONDER and select 28E ASTRA 2A/2B/2F.
5.Press the YELLOW button to edit.
6. Input 12525 on FREQUENCY.
7. Go to SYMBOL RATE and input 30000.
8. Press the RED button to scan and then press OK.
8. Press OK to save.

Comments

Sign In or Register to comment.